An engineer is installing two PCIe NICs into an existing VRTX chassis. Node 1 has three PCIe cards assigned to it already. After installation, the engineer is unable to assign the two new NICs to node 1.
What should the engineer do to assign the two PCIe NICs to node 1?
Update the CMC firmware
Power off the node
Upgrade the license
Reseat the NICs
Correct answer: A
Question 2
A VRTX server comes with two server modules. The customer requests to assign three PCIe Adapters per each server module. While performing this configuration, the engineer is unable to assign more than two PCIe Adapters per server module.
What is the cause of this issue?
The VRTX chassis came with a CMC Express License.
The CMC configuration needs to be reset to the factory defaults.
The VRTX chassis needs to be updated with the latest firmware.
An engineer deploys an FX2 and plugs cables from GB1 and STK/GB2 into the management network switch for path and NIC redundancy. When the chassis is powered up, the management network is adversely affected.
What should the engineer do to fix this issue?
Plug the CMC Redundancy Dongle into GB1 and STK/GB2