Download Cisco.350-401.NewDumps.2020-12-15.239q.tqb
| Vendor: | Cisco |
| Exam Code: | 350-401 |
| Exam Name: | Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) |
| Date: | Dec 15, 2020 |
| File Size: | 11 MB |
Demo Questions
Question 1
When a wired client connects to an edge switch in an SDA fabric, which component decides whether the client has access to the network?
- control-plane node
- Identity Service Engine
- RADIUS server
- edge node
Correct answer: B
Question 2
Refer to the exhibit.
An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as the exit point. Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplish task?
- R4(config-router)#bgp default local-preference 200
- R3(config-router)#neighbor 10.1.1.1 weight 200
- R3(config-router)#bgp default local-preference 200
- R4(config-router)#neighbor 10.2.2.2 weight 200
Correct answer: A
Explanation:
Local preference is an indication to the AS about which path has preference to exit the AS in order to reach a certain network. A path with a higher local preference is preferred. The default value for local preference is 100. Unlike the weight attribute, which is only relevant to the local router, local preference is an attribute that routers exchange in the same AS. The local preference is set with the bgp default local-preference value command. In this case, both R3 & R4 have exit links but R4 has higher local-preference so R4 will be chosen as the preferred exit point from AS 200. (Reference:http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00800c95bb.shtml#lo calpref) Local preference is an indication to the AS about which path has preference to exit the AS in order to reach a certain network. A path with a higher local preference is preferred. The default value for local preference is 100.
Unlike the weight attribute, which is only relevant to the local router, local preference is an attribute that routers exchange in the same AS. The local preference is set with the bgp default local-preference value command.
In this case, both R3 & R4 have exit links but R4 has higher local-preference so R4 will be chosen as the preferred exit point from AS 200.
(Reference:
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00800c95bb.shtml#lo calpref)
Question 3
Which protocol infers that a YANG data model is being used?
- SNMP
- REST
- RESTCONF
- NX-API
Correct answer: C
Explanation:
YANG (Yet Another Next Generation) is a data modeling language for the definition of data sent over network management protocols such as the NETCONF and RESTCONF. YANG (Yet Another Next Generation) is a data modeling language for the definition of data sent over network management protocols such as the NETCONF and RESTCONF.
